sem/5g_drone_ROS2
1
0
Fork 0
Code Issues 1 Pull Requests 1 Actions Packages Projects Releases Wiki Activity

add optical flow enabled and emergency force stop

Browse Source
This commit is contained in:
Sem van der Hoeven
2023-07-10 15:13:57 +02:00
parent f0cbebf874
commit 195ddc6ab9
1 changed files with 15 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
README.md
View File

@@ -4,6 +4,7 @@ By Sem van der Hoeven
## Table of contents ## Table of contents
- [Introduction](#introduction) - [Introduction](#introduction)
- [EMERGENCY FORCE STOP](#emergency-force-stop)
- [Pin layout](#pin-layout) - [Pin layout](#pin-layout)
- [Connecting to API](#connecting-to-api) - [Connecting to API](#connecting-to-api)
- [Installing API](#installing-api) - [Installing API](#installing-api)
@@ -40,6 +41,16 @@ To add new API functionality, you can do the same, but for the code in the api f
# (On the edge computer) restart API # (On the edge computer) restart API
sudo systemctl restart webserver sudo systemctl restart webserver
``` ```
## EMERGENCY FORCE STOP
If, for whatever reason, the drone does not respond to the API, you can force stop all nodes on the drone and force it to land through the pixhawk using the following commands:
```bash
# on your computer, ssh into the drone
ssh ubuntu@10.100.0.40
# cd into the ROS2 workspace
cd ros2_ws
# stop all ROS2 nodes
drone_scripts/stop_services.sh
```
## Pin layout ## Pin layout
A pinout of the raspberry pi can be found [here](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html). The connections are visible in the table below: A pinout of the raspberry pi can be found [here](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html). The connections are visible in the table below:
|Raspberry Pi pin|Function|Connected to| |Raspberry Pi pin|Function|Connected to|
@@ -124,6 +135,7 @@ To enable communication with the flight computer, the following parameters shoul
The optical flow sensor is a [Hex HereFlow PMW3901](https://docs.px4.io/main/en/sensor/pmw3901.html#hex-hereflow-pmw3901-optical-flow-sensor) and it's connected to the CAN port of the pixhawk. The parameters to enable the optical flow sensor are: The optical flow sensor is a [Hex HereFlow PMW3901](https://docs.px4.io/main/en/sensor/pmw3901.html#hex-hereflow-pmw3901-optical-flow-sensor) and it's connected to the CAN port of the pixhawk. The parameters to enable the optical flow sensor are:
|Parameter|Value|Function| |Parameter|Value|Function|
|---|---|---| |---|---|---|
|EKF2_OF_CTRL |1 (Enabled)|Enable optical flow sensor fusion|
|UAVCAN_ENABLE|2 (Sensors automatic config)|Enable UAVCAN for sensors| |UAVCAN_ENABLE|2 (Sensors automatic config)|Enable UAVCAN for sensors|
|UAVCAN_SUB_FLOW|Enabled|subscribe to optical flow messages| |UAVCAN_SUB_FLOW|Enabled|subscribe to optical flow messages|
|UAVCAN_SUB_GPS|Disabled|subscribe to GPS messages| |UAVCAN_SUB_GPS|Disabled|subscribe to GPS messages|
@@ -132,8 +144,9 @@ To reverse this, and be able to use GPS, the parameters should be:
|Parameter|Value|Function| |Parameter|Value|Function|
|---|---|---| |---|---|---|
|UAVCAN_ENABLE|0 (Disabled)|Enable UAVCAN for sensors| |EKF2_OF_CTRL |0 (Disabled)|Disable optical flow sensor fusion|
|UAVCAN_SUB_FLOW|Disabled|subscribe to optical flow messages| |UAVCAN_ENABLE|0 (Disabled)|Disable UAVCAN for sensors|
|UAVCAN_SUB_FLOW|Disabled|don't subscribe to optical flow messages|
|UAVCAN_SUB_GPS|Enabled|subscribe to GPS messages| |UAVCAN_SUB_GPS|Enabled|subscribe to GPS messages|